Hurrican Shutters

Installing "Peace of Mind"

Dangers of installing hurricane protection yourself.

Posted by cat5shuttersllc on September 25, 2013

Dangers of installing hurricane protection yourself.With the types of shutters in mind and good information about different types of fasteners and anchors, you can decide what shutter solutions are best suited for your house and budget and pick the type of anchor to use for your house. A table giving anchor size and spacing, using a one-size-fits-all philosophy, is included a little further down on this page. If you follow that spacing guidance, you can achieve a solid permanent anchor system for your shutters. Next you will need to have or develop skill at installing fasteners into the walls of your house. This will likely involve skills at which you may not be practiced. This is especially true for concrete and concrete block installations that, in many situations and with most anchors and fasteners, require installation experience to ensure that the connections can withstand the vibrations created by hurricane winds. Special, though not exotic, tools may be required, such as a hammer drill, metal cutting blade for a skill saw, tools for setting anchors, ladders, etc. If you have these skills and have or can borrow or rent tools, then you may well want to consider installing shutters yourself. Bear in mind that to feel safe and be safe, shutter systems must be designed properly and installed properly. Cost will likely be an important consideration when deciding whether to do it yourself or not. So bear in mind that though some panels may seem relatively inexpensive based on the square foot price of raw materials (such as plywood, or polycarbonates, etc.) you need to carefully lay out your panels and consider how much wasted material there will be that will raise the overall cost. Unfortunately cutting shutters from 4’x8′ pieces of plywood or polycarbonate product will frequently result in a lot of scraps you can’t use. Unless windows are small, you should figure that each window will require one 4 by 8 sheet of panel material. A typical bedroom window that is 3’ by less than 6’ will consume a full sheet, leaving scraps so small that they are practically worthless.
Professional installation relieves you of the burden of designing the shutter system and the physical task of installing them. It does not relieve you of the burden of selecting a reputable and competent installation company that is capable of designing shutter systems and then getting them installed. CAT 5 Shutters, LLC is a license and insured company with references readily available. Visit us at www.cat5hurricaneshutterswpb.com . We provide free estimates.
The design aspect may be made less risky if your building department requires a building permit and the building department is knowledgeable and able to review the shutter plans. Building departments cannot usually have the knowledge or time to make effective inspections of all installations. This is a weak link without an easy answer. One of the problems is that some shutter installation companies subcontract out the installation and do not have the incentive, knowledge, or will to inspect the installations themselves. CAT 5 Shutters, LLC does not subcontract out any of our work and we even manufacture on the premises. At times, the largest problems with hurricane shutter systems are the lead time for orders and installation backlog. For this reason, you will want to arrange for professionally installed shutters well in advance of the hurricane season. It is likely that having shutters made and installed during the off-season will save you money as well. Alternatively, you may choose the Do-It-Yourself (DIY) option, which can offer equal protection, reduced costs, and faster installation with minimal tools and average tools skills. There are several things to consider prior to selecting a DIY system. Building codes are required and no matter who installs the hurricane protection the job must pass inspections and be up to code. For any additional information please don’t hesitate to call Cat 5 Shutters, LLC located in West Palm Beach, Florida at 561-333-Cat5 . We look forward to answering any questions you may have.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

 
%d bloggers like this: